GSA-CC1 & GSA-CC2

Overview
 GSA-CC1/MCC1 Single Input Signal Modules and GSA-CC2/
 MCC2 Dual Input Signal Modules are part of Kidde's Signature 
Series system. They are intelligent analog addressable devices 
used for connecting, upon command from the loop controller, 
supervised Class B signal or telephone circuits to their respective 
power inputs. The power inputs may be polarized 24 Vdc to 
operate audible and visible signal appliances or 25 and 70 VRMS 
to operate audio evacuation speakers and firefighter’s telephones.
 The actual operation of the GSA-CC1/MCC1 and GSA-CC2/
 MCC2 is determined by the “personality code” selected by the 
installer. It is downloaded to the module from the Signature loop 
controller during system configuration.
 The GSA-CC1 and GSA-CC2 mount to standard North 
American two-gang electrical boxes, making them ideal for 
locations where only one module is required. Separate I/O and 
data loop connections are made to each module.
 
 Standard Features
 • Single and Dual input (riser) select 
Use for connecting supervised 24 Vdc Audible/Visible signal 
circuits, or 25 and 70 VRMS Audio Evacuation and Telephone 
circuits to their power inputs.
 • Ring-tone generator 
When configured for telephone circuits, the GSA-CC1 
generates its own ring-tone signal eliminating the need for a 
separate ring-tone circuit.
 • Plug-in (UIO) or standard 2-gang mount 
UIO versions allow quick installation where multiple modules 
are required. The 2-gang mount version is ideal for remote 
locations that require a single module.
 • Automatic device mapping 
Signature modules transmit information to the loop controller 
regarding their circuit locations with respect to other Signature 
devices on the wire loop.
 • Electronic addressing 
Programmable addresses are downloaded from the loop 
controller, a PC, or the SIGA-PRO Signature Program/Service 
Tool; there are no switches or dials to set. 
• Intelligent device with microprocessor 
All decisions are made at the module to allow lower 
communication speed with substantially improved control panel 
response time and less sensitivity to line noise and loop wiring 
properties; twisted or shielded wire is not required.
 • Ground fault detection by address 
Detects ground faults right down to the device level.