VM-ETH

Description

The VM-ETH Ethernet Adapter Card provides a standard 10/100BaseT Ethernet network connection for control panel programming and diagnostics. It also provides transmission of system events to central monitoring stations (CMSs), computers running FireWorks, and SMTP email servers. The following table below describes the available models.

Tags: VM-ETH

Mô tả
Tải về

Models
- VM-ETH1: Supports panel programming and diagnostics, and
communication with a computer running FireWorks
- VM-ETH2: Supports panel programming and diagnostics, and
communication with a computer running FireWorks and a
CMS
- VM-ETH3: Supports panel programming and diagnostics, and
communication with a computer running FireWorks, a
CMS, and an SMTP email server
Installation
Install and wire the adapter card in accordance with applicable national
and local codes, ordinances, and regulations.
WARNING: Electrocution hazard. To avoid personal injury or death
from electrocution, remove all sources of power and allow stored
energy to discharge before installing or removing equipment.
Cautions
• Equipment damage hazard. This product is sensitive to
electrostatic discharge (ESD). To avoid damage, follow accepted
ESD handling procedures.
• If removing the VM-CPU main board, first pull out the four plungers
securing it to the electronics chassis. Failure to do so can result in
damage to the main board.