Gọi ngay
KI-PD
The KI-PD optical smoke detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reli ability over the long-haul, while environmental compensation helps reduce maintenance costs.
Standard Features
Note: Some features described here may not be supported by all control systems. Check your control panel’s Installation and Operation Guide for details.
• Next generation optical smoke sensing technology
• Wide 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) smoke obscuration
• Uses Existing Wiring
• Automatic Device Mapping
• Up To 250 Total Addresses Per Loop
• Two Levels of Environmental Compensation
• Two Levels of Dirty Detector Warning
• Twenty Pre-Alarm Settings
• Five Sensitivity Settings
• Non-Volatile Memory
• Electronic Addressing
• Identification of Dirty or Defective Detectors
• Automatic Day/Night Sensitivity Adjustment
• Bicolor (Green/Red) Status Led
• Standard, Relay, Fault Isolator, and Audible Mounting Bases
• Sensor Markings Provide Easy Testing Identification
Application
The KI-PD detects extremely small particles of combustion and
triggers an alarm at the first sign of smoke. Thanks to its high
performance forward-scattering reflective response technology,
the photoelectric smoke sensor responds quickly and reliably to
a wide range of fire types, espe cially slow burning fires fuelled by
combustibles typically found in modern multi-use buildings.
Compatibility
The KI-PD detector is compatible with Kidde VS and VM series
panels
