APS6A/APS10A

The APS contains the circuitry to monitor and charge internal or external batteries. Its steel enclosure has room for up to two 24 ampere-hour batteries. The APS has four Class B (convert ible to two Class A) NACs. These can be activated in one or two groups from the APS’s unique dual input circuits. The APS has a door-mounted AC power indicator LED.

The APS also has room for and can power a number of different modules. These can be Signature AA-30 or AA-50 dual-channel audio amplifiers, UIO modules and/or GSA-RELs.

The APS is available in 6.5 or 10 ampere models. Each output cir cuit is has a capacity of three amperes; total current draw cannot exceed the unit’s rating.

Features
• Allows for reliable filtered and regulated power to be installed where needed
• Cost effective system expansion
• Provides for Genesis and Enhanced Integrity notification ap pliance synchronization 03/31/21 Page 1 of 4 S3424 7300-1657: 0229 COA 6020
• Supports coded output operation
• Self-restoring overcurrent protection
• Multiple signal rates
• Can be cascaded or controlled independently
• Easy field configuration
• On-board diagnostic LEDs identify wiring or internal faults
• Standard Kidde keyed lockable steel cabinet with removable door
• 110 and 230 Vac models available 
• Accommodates 18 to 12 AWG wire sizes
• Optional tamper switch 
• Dual battery charging rates.