Thiết Bị Phòng Cháy Chữa Cháy

GSA-MM1

GSA-MM1

Monitor Module
The GSA-MM1 is a single-circuit intelligent module that includes a Class B normally-open dry contact. This is used for monitoring...
GSA-WTM

GSA-WTM

Waterflow/Tamper Module
The GSA-WTM Waterflow/Tamper Module is a two circuit intelligent module. Circuit 1 is for Class B normally-open waterflow alarm...
GSA-IM

GSA-IM

Isolator Module
The GSA-IM Isolator Module is an intelligent device that allows part of the data loop to con tinue operating in the event...
GSA-CT2

GSA-CT2

Class B Input Module
The Class B Input Module is used to connect Class B normally-open Alarm, Supervisory, or Monitor type dry contact initiating...
GSA-CT1

GSA-CT1

Class B Input Module
The Class B Input Module is used to connect Class B normally-open Alarm, Supervisory, or Monitor type dry contact initiating...
GSA-MAB

GSA-MAB

Universal Class A/B Module
The Universal Class A/B Module is used to connect initiating, appliance, or two-wire smoke circuits in either Class...
GSA-UM

GSA-UM

Universal Class A/B Module
The Universal Class A/B Module is used to connect initiating, appliance, or two-wire smoke circuits in either Class...
VM-SLC

VM-SLC

VM-SLC Signaling Line Circuit Card provides one Class B or Class A signaling line circuit loop on a VM-CPU main board that supports...
VM-SLCXB

VM-SLCXB

The VM-SLCXB Signaling Line Loop Controller Expansion Card provides up to two Class A, Class X or Class B data circuits for V-Series...
CLA-PS10

CLA-PS10

CLA-PS10 Class A Adapter Card
The CLA-PS10 Class A Adapter Card converts the four Class B notification appliance/auxil iary power circuits on...
KI-RB

KI-RB

The KI-RB is a Signature Series detector base. It connects the detector to the signaling line circuit (SLC), but does not support the GSA...
KI-IB

KI-IB

The KI-IB is a Signature Series detector base with a built-in line fault isolator for use on a Class A signaling line circuit...
zalo zalo